Author Topic: Olli's Imperial Shuttle, modified  (Read 703 times)

Texman

  • Verified Member
  • *
  • Posts: 24
  • Kudos 0
Olli's Imperial Shuttle, modified
« on: March 10, 2016, 08:15:33 PM »
Needing to do something different, I tried Olli's shuttle.  But, being I cannot leave anything alone,
modified it.

First, when I printed it, I did not like the color, so I lightened it.  Then, after printing several copies,
I began the layering process to give a more dimensional appearance.

Here, in the first pic, is the main vertical wing cut out parts used for layering.
In the second pic, you can see the parts added onto the vertical wing.  The upper
most box was cut out, and a layer added behind it, giving a 3 layer appearance.

Ray

Respect the Paper, RESPECT IT!

Texman

  • Verified Member
  • *
  • Posts: 24
  • Kudos 0
Re: Olli's Imperial Shuttle, modified
« Reply #1 on: March 10, 2016, 08:16:55 PM »
In the next picture, simply parts of the fusalage and cabin.

Ray

Respect the Paper, RESPECT IT!

Texman

  • Verified Member
  • *
  • Posts: 24
  • Kudos 0
Re: Olli's Imperial Shuttle, modified
« Reply #2 on: March 10, 2016, 08:23:05 PM »
The next series of pictures, shows how I cut out a very thin box to add another level of depth.

First, the inner section of the box is cut out, and removed.  This lets me edge color the inside
edge of the part.  Then, the inner piece is re-inserted.  This provides support to the thin parts
while the outer box is cut.





Ray

Respect the Paper, RESPECT IT!

Texman

  • Verified Member
  • *
  • Posts: 24
  • Kudos 0
Re: Olli's Imperial Shuttle, modified
« Reply #3 on: March 10, 2016, 08:24:58 PM »
On to the outside.  After the outer edges are cut, the entire piece is removed, so
that the outer edges can be colored, again, using the inner part for support.

After the edge color has dried, the inner section is once again removed, leaving you
with a thin edged part, ready to be applied.

Then, more parts are layered on, as in the original post.

Tomorrow, finished pictures.
Ray

Respect the Paper, RESPECT IT!

Vermin King

  • Global Moderator
  • *****
  • Posts: 2524
  • Kudos 29
Re: Olli's Imperial Shuttle, modified
« Reply #4 on: March 10, 2016, 08:44:31 PM »
Looking good.  You are going to be finished tomorrow?
There are no strangers in this world ...
Only people I haven't embarrassed ... yet

Texman

  • Verified Member
  • *
  • Posts: 24
  • Kudos 0
Re: Olli's Imperial Shuttle, modified
« Reply #5 on: March 10, 2016, 08:55:23 PM »
I actually finished this morning, but I just now got around to posting about it!
Ray

Respect the Paper, RESPECT IT!

Dave Winfield

  • Administrator
  • *****
  • Posts: 2645
  • Kudos 51
    • Dave's Card Creations
Re: Olli's Imperial Shuttle, modified
« Reply #6 on: March 11, 2016, 06:42:44 PM »
lol wow very cool

Not really a Star Wars fan, but some of these little models are cool.
So much cooler now.


*you gotta shoot some of the photos from a slight angle so we can see the layering better.

DAVE WINFIELD - GO TO WWW.CUTANDFOLD.INFO FOR MY DESIGNS AND LOTSA FREE STUFF!